Synthesis and characterization of polyimides derived from (3‐amino‐2,4,6‐trimethylphenyl)‐(3′‐aminophenyl)methanone and aromatic dianhydrides

A series of new polyimides were prepared via the polycondensation of (3‐amino‐2,4,6‐trimethylphenyl)‐(3′‐aminophenyl)methanone and aromatic dianhydrides, that is, 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA), 4,4′‐oxydiphthalic anhydride, 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride, and 2,2′‐bis(3,4‐dicarboxyphenyl) hexafluoropropane dianhydride. The structures of the polyimides were characterized by Fourier transform infrared and NMR measurements. The properties were evaluated by solubility tests, ultraviolet–visible analysis, differential scanning calorimetry, and thermogravimetric analysis. The two different meta‐position‐located amino groups with respect to the carbonyl bridge in the diamine monomer provided it with an unsymmetrical structure. This led to a restriction on the close packing of the resulting polymer chains and reduced interchain interactions, which contributed to the solubility increase. All the polyimides except that derived from BPDA had good solubility in strong aprotic solvents, such as N‐methyl‐2‐pyrrolidinone, N,N′‐dimethylacetamide, N,N‐dimethylformamide, and dimethyl sulfone, and in common organic solvents, such as cyclohexanone and chloroform. In addition, these polyimides exhibited high glass‐transition values and excellent thermal properties, with an initial thermal decomposition temperature above 470 °C and glass‐transition temperatures in the range of 280–320 °C. The polyimide films also exhibited good transparency in the visible‐light region, with transmittance higher than 80% at 450 nm and a cutoff wavelength lower than 370 nm. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1291–1298, 2006     

常压化学气相沉积技术生长ZnO:H薄膜的光学性质

采用常压金属有机物化学气相沉积技术(AP-MOCVD),以二乙基锌(DEZn)为Zn源,去离子水(H2O)为氧源,N2作载气,在外延ZnO薄膜的反应气氛中通入少量氢气,在c-Al2O3衬底上生长出了ZnO∶H薄膜。用X射线双晶衍射和光致发光谱对ZnO∶H薄膜的结晶性能和光学性质进行表征。结果表明,ZnO∶H薄膜(002)和(102)面的Ω扫描半峰全宽分别为46.1 mrad和81.4 mrad,表明该薄膜具有良好的结晶性能;室温下,ZnO∶H薄膜具有较强的紫外光发射(380 nm),在低温10 K光致发光谱中观测到位于3.3630 eV处与氢相关的中性施主束缚激子峰(I4)及其位于3.331 eV处的双电子卫星峰(TES)。采用退火的方法,通过观测I4峰的强度变化,研究了氢在ZnO∶H薄膜中的热稳定性。发现随着退火温度的升高,I4峰的强度逐渐减弱,表明在高温下退火,氢会从ZnO薄膜中逸出。     

The preparation of nano‐scope chitosan‐oligomer copper complexes and their interaction with DNA

Water‐soluble low molecular weight chitosan of nanometer level and its copper complexes were prepared, and characterized by IR spectra, elemental analysis and gel permeation chromatography (GPC). The modes and mechanism of these copper complexes interaction with DNA were studied by a fluorescent probe method and electrophoresis analysis. It is suggested that there are electrostatic and intercalation modes of copper complexes interacting with DNA. At first, the cationic complex electrostaticly binds to the negatively charged phosphate backbone of DNA, and then a portion of the complex intercalates between the base pairs on the DNA duplex strand. Copyright © 2005 John Wiley & Sons, Ltd.     

VA族元素对阳极铅(Ⅱ)氧化物膜半导体性质的影响(Ⅱ)

用光电化学电流法研究了铅、铅砷、铅锑和铅铋合金在4．5mol·L－1H2SO4溶液（22℃）中，以0．9V（vs．Hg／Hg2SO4）极化7h而形成的阳极膜中的氧化铅的半导体性质，合金添加剂砷、锑和铋对t－PbO（四方氧化铝）和o-PbO（斜方氧化铝）的禁带宽度没有影响，从量子效率和电位的关系可求Pb，Pb－lat％As（at％表示原子百分比，全文同），Pb-lat％Sb和Sb－lat％Bi上膜中t－Pbo的施主密度（ND）分别为9．3×1015，1．0×1016，3．1×1016和1．3×1017cm-3，平带位分别为-0．20，－0．22，－0．28和-0．08V（vs．Hg／Hg2SO4）．比较VA元素砷、锑和铋对上述膜中t－Pbo的ND（从而自由电子密度）和膜中t－Pbo的生长速率的影响，可认为法添加剂砷、锑和铋对阳极膜中t-Pbo的作用符合Hauffe规则．     

壳聚糖负载贵金属催化剂的研究进展

壳聚糖负载的贵金属催化剂显示了高催化活性和高选择性，已被用于氧化反应、氢化反应、烯丙基取代反应、羰基化反应、Suzuki和Heck偶联反应、烯烃的不对称二羟基化反应及有机醛、酮的合成反应体系中。本文对其制备方法、可能结构及其在各种反应体系中的催化性能进行了综述。     

碱性二苯基萘基甲烷染料褪色分光光度法测定肝素

肝素(Heparin, Hep)由葡萄糖胺磺酸、葡萄糖醛酸和艾杜糖醛酸组成, 在水溶液中由于其酸性基团的离解而成为带多个负电荷的大阴离子[1].肝素具有广泛的生物学功能, 在人体内由肥大细胞分泌而自然存在于血液中, 在体内外均有延缓或阻止血液凝固的作用. 肝素或其衍生物还可用于调血脂、抗血栓、改善血液流变学指标、抗炎、抗过敏及免疫调节等, 是重要的生化药物之一 [2]. 对不同的疾病, 肝素有不同的最适剂量, 临床上常采用生物方法 [3]来进行监控. 但由于受生物个体的影响较大, 故使其应用受到限制. 此外, 分光光度法 [1,4,5]、荧光法[6]、HPLC法[7]、细管电泳法[8]及电化学传感器[9]已用于肝素的测定, 其中分光光度法由于操作简便、快速、仪器价廉和灵敏度较高等优点而得到重视.     

BIOMARKERS INDICATING SEDIMENTARY PALEOENVIRONMENTS

Samples involved in this paper are 35 pieces of crude oils and 43 pieces of source rocks, from which a series of biomarkers, capable of indicating paleoecology and paleoenvironment. This will provide a scientific basis for tracing back to sedimenta-y paleoenvironment and paleoecology.     

Molar conductivity calculation of Li-ion battery electrolyte based on mode coupling theory

A method is proposed to calculate molar conductivity based on mode coupling theory in which the ion transference number is introduced into the theory. The molar conductivities of LiPF6, LiClO4, LiBF4, LiAsF6 in PC (propylene carbonate) are calculated based on this method. The results fit well to the literature data. This presents a potential way to calculate the conductivities of Li-ion battery electrolytes.     

Photopolymerization induced by a benzophenone derivative photoinitiator

A benzophenone derivative photoinitiator, HBP-TDI-HQ-TDI-HBP （HTCTH）, was synthesized based on 4-hydroxy benzophenone （HBP）, toluene-2,4-diisocyanate （TDI） and hydroquinone （HQ）. HTCTH was a more effective photoinitiator which had longer wavelength absorption in the UV-vis absorption spectra than the low molecular counterpart benzophenone （BP）. It showed that both rate of polymerization （Rp） and final conversion （P） increased with increase of amine and HTCTH concentration in photopolymerization.     

Theoretical and Experimental Studies on a Metallorganic Complex of (Isopropylxanthato)(Phenyl)Mercury(I) [Hg(I)(C<Subscript>6</Subscript>H<Subscript>5</Subscript>)(C<Subscript>4</Subscript>H<Subscript>7</Subscript>OS<Subscript>2</Subscript>)]

The title compound, (isopropylxanthato)(phenyl)mercury(I), was synthesized and characterized by elemental analysis, IR and thermogravimetric analysis. Density functional theory (DFT) method calculations were performed at B3LYP/CEP-121G and B3LYP/CEP-31G levels of theory, respectively. Vibrational frequencies were predicted, assigned, compared with the experimental values, and they are supported each other. The calculated results show that the strength of bond Hg—C is stronger than that of Hg—S, which is good agreement with the experimental data. The calculations of the second order optical nonlinearity and electronic absorption spectra are also performed.